2 responses on “what is cell phone jammer?

  1. KC

    A cell phone jammer is an instrument used to prevent cellular phones from receiving and transmitting the mobile signals to a base station. When used, the jammer effectively disables cellular phones in the area. These devices can be used in practically any location, but are found primarily in locales where a phone call would be particularly disruptive. These include places of worship (churches, mosques, etc.), libraries, movie theaters, meeting rooms, and other places where silence is expected.

    Disrupting a cell phone is the same as jamming any other type of radio communication. A cell phone works by communicating with its service network through a cell tower or base station. Cell towers divide a city into small areas, or cells. As a cell-phone user drives down the street, the signal is handed from tower to tower.

    A jamming device transmits on the same radio frequencies as the cell phone, disrupting the communication between the phone and the cell-phone base station in the tower

    It’s a called a denial-of-service attack. The jammer denies service of the radio spectrum to the cell-phone users within range of the jamming device.

    Jamming devices overpower the cell phone by transmitting a signal on the same frequency and at a high enough power that the two signals collide and cancel each other out. Cell phones are designed to add power if they experience low-level interference, so the jammer must recognize and match the power increase from the phone.
    Cell phones are full-duplex devices, which means they use two separate frequencies, one for talking and one for listening simultaneously. Some jammers block only one of the frequencies used by cell phones, which has the effect of blocking both. The phone is tricked into thinking there is no service because it can receive only one of the frequencies.

    Less complex devices block only one group of frequencies, while sophisticated jammers can block several types of networks at once to head off dual-mode or tri-mode phones that automatically switch among different network types to find an open signal. Some of the high-end devices block all frequencies at once, and others can be tuned to specific frequencies.

    To jam a cell phone, all you need is a device that broadcasts on the correct frequencies. Although different cellular systems process signals differently, all cell-phone networks use radio signals that can be interrupted. GSM, used in digital cellular and PCS-based systems, operates in the 900-MHz and 1800-MHz bands in Europe and Asia and in the 1900-MHz (sometimes referred to as 1.9-GHz) band in the United States. Jammers can broadcast on any frequency and are effective against AMPS, CDMA, TDMA, GSM, PCS, DCS, iDEN and Nextel systems. Old-fashioned analog cell phones and today’s digital devices are equally susceptible to jamming.

    The actual range of the jammer depends on its power and the local environment, which may include hills or walls of a building that block the jamming signal. Low-powered jammers block calls in a range of about 30 feet (9 m). Higher-powered units create a cell-free zone as large as a football field. Units used by law enforcement can shut down service up to 1 mile (1.6 km) from the device.

  2. getnightlife

    It is a small device usually disguised a cell phone. It can jam cell phones close to the device usually up to 30 feet away. It is illegal in the USA.

Leave a Reply

Your email address will not be published. Required fields are marked *